Your Cart (0)
Thumbnail Filmstrip of LED Warm White Lights w/2 Blinking Amber Marker Lights for Cupola Cabooses (DC/Analog only) Images
Use this light on your 4 Axle LGB or Piko Cabooses that have cupolas that are centered or slightly off center (Drovers Caboose)
Measurement of the light strip is 6 x 2 x 4", this means you have a 6" strip of lights to go on the section of roof in front of the Cupola, 2" to go inside of the Cupola and 4" for the roof section behind the cupola.
Contents:
6" x 2" x 4" LED Strip with adhesive backing for easing mounting & 2 Blinking Amber Tail Lights w/mounting bezels to use as markers or tail lights
Anti-flickering capacitor with an inline quick disconnect which allows for easy roof removal if necessary in the future.
Small piece of heat shrink tubing and wire nuts for any wire lead run if needed.
This water resistant Flexible LED lighting Ribbon can be used in a wide variety of applications, eliminating any worries of running your railroad outdoors, Indoors, or near or around areas with moisture.
You will need to pull power from the track (on just 1 axle) to illuminate these lights. We recommend either LGB Ball Bearing Wheels (67403) or Piko Ball Bearing Wheels (36168) with the item LEDPick to accomplish this.
The 2nd image shown gives you an idea of the coloring of the bulbs available. From left to right shows a caboose with the interior and marker lights illuminated with warm white lights, a search light car illuminated with warm white lights and a caboose with warm white interior lights, an amber light on top and red tail lights.
These lights should not be pulling power from a transformer that is more than 10 Amps. If pulling power from your track (or a transformer directly) and you are using more than 10 amps of power please call to discuss your options for these lights.
**This light kit is for use only on a DC or Analog system. If you need lights for a DCC/Digital layout please contact us to discuss your options.