SKU: 8210019 Massoth 8210019 eMotion XLS Sound Decoder

Powerful 3 Amp sound decoder (up to six audio channels) with 13 function outputs, suitable for up to two motors.
Now with connection socket for decoupler or current collector drive. Lift clamps are now used to facilitate the clamping of the cables.

eMOTION XLS is the new term and functional standard in sound decoding. An eMOTION XLS sound decoder combines a driving decoder with a correspondingly powerful decoder output stage (3 amps) for up to 2 motors and a particularly high-quality sound output stage with 6 usable sound channels. A standard that has been used in Massoth sound modules for many years. In addition, 11 switching outputs and 4 contact inputs round off the functional range of the sound decoder perfectly.

OPTIMUM ANALOGUE AND DIGITAL OPERATION GUARANTEED

Thanks to over 30 years of experience in the field of sound modules for model trains, the new eMOTION XLS sound decoders offer optimum analog and digital driving characteristics and provide the sound function from just a few volts, especially in analog operation. This is an argument in favour of the eMOTION XLS sound decoder.
Braking via break on DC is also possible (braking via a specially polarised DC voltage.

NMRA DCC and LGB® MZS
Of course the eMOTION XLS sound decoder supports the full NMRA DCC functionality. Thanks to automatic detection for LGB® MZS systems, the eMOTION XLS sound decoder is also suitable for all generations of the LGB® MZS multi-pull control system.
An LGB control or Susi interface is integrated.

ORIGINAL SOUND in digital quality

The eMOTION XLS sound decoder reproduces the authentic sounds of a locomotive in high-quality digital quality. For this purpose, sound recordings are made directly on the model and then adjusted in the sound laboratory for the electronics. The eMOTION XLS sound decoders have a total playback time of up to 145 seconds. This enormous storage volume is sufficient to provide the sound decoder with various additional sounds.

Components like clock, reed switches, loudspeaker, Power Buffer, SUSI, etc. are just plugged-in after the decoder has been installed.  See related items for these components.